Posted on: October 16, 2022 Posted by: Admin Comments: 0

Particle board cabinets are a cheaper alternative to solid wood cabinets, but they’re not as durable. Over time, the veneer on particle board cabinets can start to peel away, especially if the cabinets are exposed to moisture. If your particle board cabinets are peeling, don’t fret — with a little bit of elbow grease, you can repair them yourself.

unsplash, Bailey Alexander

A common problem with particle board cabinets is that the veneer can start to peel away, especially at the edges. If this happens to your cabinets, don’t despair – there are ways to repair the peeling veneer and make your cabinets look like new again.

One way to repair peeling veneer is to use a wood glue. Simply apply a layer of glue to the back of the veneer and press it firmly into place. You may need to clamp the veneer in place while the glue dries.

pexels, Tima Miroshnichenko

Another way to fix peeling veneer is to use double-sided tape. This method is particularly effective if the peeling veneer is only minor. Simply apply a strip of double-sided tape to the back of the veneer and press it firmly into place.

If the veneer is severely damaged or peeling away in large pieces, you may need to replace it. You can purchase veneer sheets at most home improvement stores. To replace the veneer, simply remove the old veneer (using a putty knife or similar tool) and apply the new sheet in its place. Secure the new veneer with wood glue or double-sided tape.

unsplash, Beazy

With a little time and effort, you can easily repair peeling veneer on particle board cabinets. This will give your cabinets a fresh, new look and extend their lifespan.

If you have particle board cabinets that are starting to show their age, you may be wondering how to repair the peeling veneer. While it’s not a perfect solution, repairing the veneer is certainly better than replacing the entire cabinet.

What is Veneer?

Veneer is a thin layer of wood that is applied to the surface of particle board cabinets. Veneer can be made from real wood or it can be a man-made material that resembles wood. It is attached to the particle board with adhesive. Over time, the adhesive can fail and the veneer will start to peel away from the surface.

pexels, Eva Bronzini

If you have peeling veneer on your cabinets, there are a few things you can do to repair it. One option is to use wood glue to reattach the veneer to the particle board. Another option is to replace the veneer altogether. You can buy new veneer at most hardware stores.

Here’s what you’ll need to repair your peeling veneer cabinets:

  • Sandpaper
  • Paint primer
  • Paint
  • Tape measure
  • Ruler or a straight edge
  • Utility knife
  • Veneer adhesive
  • Foam brush

Here’s what you’ll need to do to repair peeling veneer on particle board cabinets:

  • Start by sanding down the area around the peeling veneer. This will help to create a smooth surface for the new veneer to adhere to.

unsplash, subvertivo _lab
  • Next, apply a layer of wood glue to the back of the new veneer. Then, press the veneer into place on the cabinet.
unsplash, Douglas Bagg
  • Now, press the new veneer into place and use a clamp to hold it there until the glue dries.
  • Once the glue is dry, apply another thin layer of glue to the back of the veneer and place it onto the cabinet surface. Use a putty knife or other flat object to smooth out any bubbles or wrinkles.
Pexels, Ono Kosuki
  • Finally, allow the glue to dry completely before sanding down the area again with a fine-grit sandpaper. Wipe away any dust with a damp cloth and your cabinets will be good as new!

Repairing peeling veneer on particle board cabinets isn’t a perfect solution, but it will extend the life of your cabinets and help them to look their best. With a little bit of time and effort, you can have your cabinets looking like new again.

If the veneer is severely damaged or peeling in large areas, it will need to be replaced. This is a difficult and time-consuming process, but it can be done. You will need to remove all of the old veneer, sand down the particle board, and then apply new veneer.


Here is what you need to do to replacing the veneer, follow these instructions:

  • Remove the old veneer from the surface of the cabinets with a putty knife or other sharp object. Be careful not to damage the particle board underneath.
Pexels, Tima Miroshnichenko
  • Clean the surface of the cabinets with a damp cloth to remove any dirt or debris.
  • Cut the new veneer to size using a sharp knife or scissors.
  • Apply wood glue to the back of the new veneer and attach it to the surface of the cabinets. Use clamps or weights to hold it in place until the glue dries.
Pexels, Tima Miroshnichenko
  • Trim off any excess veneer with a sharp knife or scissors.
  • Sand down the edges of the new veneer with sandpaper to create a smooth finish.
pexels, Ono Kosuki
  • Wipe down the cabinets with a damp cloth and let them dry completely before applying a new coat of paint or stain, if desired.
pexels, Ono Kosuki

If the damage to your veneer is more minor, you may be able to repair it without having to replace the entire sheet as in the previous instructions.  To do this, you will need to use a wood filler to fill in any cracks or holes, and then sand the area smooth. You may also need to apply a new layer of contact cement to hold the veneer in place. Once the repair is complete, you can sand and paint the area to match the rest of your cabinets.

Repairing or replacing peeling veneer is a fairly easy process that anyone can do. With a little bit of time and effort, you can repair your damaged veneer and restore your cabinets to their original beauty.

Leave a Comment